투명 LED 차량 디스플레이, 도시 대중교통 광고를 혁신하다
Vehicle-mounted transparent LED displays are turning taxis, ride-hailing cars and buses into mobile digital billboards. They combine low-power, weather-resistant hardware with modular brackets and 3G, 4G and Wi-Fi control for remote content updates. Designed for urban transit advertising, the systems support rapid installation, maintenance and flexible campaign scheduling while balancing vehicle safety and electrical load.
모바일 광고를 위한 고성능 택시 LED 디스플레이를 선택하는 가이드
This guide explains how to select high-performance taxi-top LED displays for mobile advertising, covering key specifications like pixel pitch and brightness, hardware durability for vehicle-mounted environments, and remote content delivery. It also addresses visibility, protective performance, and network requirements for fleet management.
110V 대 220V 고전압 LED 스트립 라이트 선택 기술 안내
This technical guide compares 110V and 220V high-voltage LED strips across grid compatibility, feed distance, voltage drop, and thermal management, and corrects common installation myths. It explains that 110V strips suit 110V–120V grids with runs of 20–30 meters, while 220V strips suit 220V–240V grids with runs of 50–100 meters, and stresses matching the strip to local mains voltage.
SINTRA LED 교통 신호 모듈은 도시 도로 안전 표준을 높인다
SINTRA's 8-inch LED traffic signal modules combine high-power LEDs with polycarbonate housings, certified to TS EN 12368:2015 and rated IP65 for reliable performance in extreme weather. At 7 W per module, they offer low power consumption, reduced heat output, and long service life with minimal maintenance.
아두이노 UNO로 제작된 스마트 4방향 신호등 시스템
This blog explains how to build a four-way traffic light control system using an Arduino UNO, integrating infrared sensors, traffic light modules, and an I2C LCD display. It covers the hardware architecture, wiring standards, control logic, and troubleshooting tips for reliable operation.
아두이노와 LED 매트릭스를 이용한 교통 신호 카운트다운 시스템 최적화
The blog proposes replacing conventional three-color traffic lamps with bi-color red-green seven-segment LED countdown displays to simplify intersection hardware and give drivers a direct countdown reference. It compares the MAX7219 and 74HC595 driver options for an Arduino Uno and recommends the MAX7219 for its integration and reduced wiring complexity.
시각적 성능을 위한 P5 및 P10 LED 디스플레이 간의 선택
P5 and P10 LED displays differ in pixel pitch and density, with P5 offering four times the pixels per square meter for finer detail at close range, while P10 suits large screens viewed from about ten meters away. The choice depends mainly on audience viewing distance, content type, and budget.
?
Variable Message Signs (VMS) have evolved from simple 1950s traffic tools into sophisticated, energy-efficient information hubs that deliver real-time updates on weather, accidents, and road conditions. Integrated with radar and license plate recognition, they enhance traffic flow, deter unsafe driving, and support life-saving systems like AMBER Alerts, which have helped recover hundreds of missing children.